45 mm x 100 mm x 39,7 mm FAG 3309-DA Angular Contact Ball Bearings

d:15 mm; Characteristic rolling element frequency, BSF:4.73 Hz; Weight / Kilogram:0.025; Harmonized Tariff Code:8482.10.50.68; Bore:0.591 Inch | 15 Mill; Inch - Metric:Metric; Inner Race Width:0 Inch | 0 Millimete; UNSPSC:31171504; Characteristic outer ring frequency, BPF0:3.59 Hz; Other Features:De

rs min:1.1 mm; r1s min:0.6 mm; Characteristic inner ring frequency, BPFI:6.23 Hz; Characteristic rolling element frequency, BSF:3.81 Hz; Characteristic outer ring frequency, BPF0:3.77 Hz; Brand:NTN; da max:27 mm; Product Group:B04144; Characteristic cage frequency, FTF:0.38 Hz; D:52 mm;

Static load, C0:38.5 kN; Product Group:B00308; row type & fill slot:Single Row Non-Fill; Category:Single Row Ball Bear; internal clearance:CN; outside diameter:110 mm; snap ring included:Without Snap Ring; static load capacity:38500 N; Nlim (grease):6,400 rpm; Fatigue limit load, Cu:1.75 kN;

Brand:Baldor-Dodge; Expansion Type:Expansion; Seal Type:Piston Ring; Housing Product Type:SPECIAL DUTY; Housing Type:2 Bolt Pillow Block; UPC:782475036554; Bearing Series:115 Series; Ship Weight:34.76 LB; Split Housing:SPLIT; Bearing Bore Shape:Tapered;

e:28 mm; G:R1/8"; A1:15 mm; A:45.8 mm; C:43.55 kN; s1:22.65 mm; L:134 mm; N:18mm; S:11.8 mm; H:222 mm;

Dz:100 mm; Z:90.5 mm; Designation of housing:SP208-210/90N-; S:24.6 mm; C0:23.2 kN; L:320 mm; SW:4 mm; Designation of open end cover:SCOE210-50; H2:61 mm; d:50 mm;

C0:20.8 kN; Weight:3.88 kg; B:49.2 mm; H2:61 mm; d:41.28 mm; C:31.85 kN; L1:260 mm; A5:30.2 mm; H:120 mm; Designation of bearing:UC209-26G2L4;

Brand:SNR; Y0:3.13; Min operating temperature, Tmin:-40 °C; Nref:2,400 rpm; Mass:9.3 kg; Y2:4.77; Characteristic outer ring frequency, BPF0:11.14 Hz; D:240 mm; Characteristic rolling element frequency, BSF:8.99 Hz; Radial clearance class:C3;

d1:27.2 mm; T max.:100 °C; s1:23.05 mm; G1:M16; Recommended tightening torque for set screw:5.5 Nm; S:6.5 mm; T min.:-40 °C; L:91 mm; C0:4.78 kN; Designation of housing:EHE203-;

Recommended tightening torque for set screw:3.7 Nm; N:M14; B:38.1 mm; A1:25 mm; L:94 mm; Z:51.8 mm; Dz:70 mm; d:30.16 mm; L1:30 mm; Designation of bearing:UC206-19G2L3;

Designation of bearing:UC209-27G2L4; J:150 mm; T min.:-20 °C; H2:107 mm; Designation of housing:PE209-; N1:29 mm; A1:32 mm; H:54 mm; d:42.86 mm; C0:20.8 kN;

Weight:3.61 kg; Designation of housing:C213-; s1:57.6 mm; d:63.5 mm; SW:4.76 mm; A5:34.1 mm; C0:40 kN; G:M6x1; A:40 mm; T max.:100 °C;

H1:17 mm; Designation of bearing:UC206G2T04; C0:11.2 kN; s1:19.05 mm; S:15.9 mm; L:158 mm; A:40 mm; Weight:1.12 kg; N:14mm; G:R1/8";

T max.:100 °C; T min.:-40 °C; s1:15.5 mm; S:12.7 mm; N:M8; Designation of housing:PAE204N-; A1:19 mm; J:50.8 mm; L1:18 mm; Designation of bearing:UC204G2T04;

S:18.8 mm; H:161 mm; A2:51.3 mm; Weight:1.36 kg; C:25.7 kN; Designation of housing:FL207-; L:90 mm; N:16mm; s1:36.3 mm; T max.:100 °C;